|Home||» Products||» Industrial Machineries||» Automatic Double Head Bearing And Sealing Assembly|
Automatic Double Head Bearing And Sealing Assembly
This machine is used for assembling bearing/seal/dust cap into the roller. The bearing/seal/dust cap shall be loaded onto the pressing head by manual, and pressing head press the bearing/seal/dust cap onto the both end of roller at one time. After bearing and sealing are assembled, the operator shall manually be assembled the keylock. This machine specially designed with buffer pressing structure. We ensure you about assembling precision as well as avoiding the defects like inadequate assembling and distortion etc.
(Testing & Inspection)
Total indicated runout(TIR)
As per IS 8598 maximum allowable run out is 1.6mm. and for that we measuring the run out of roller with the help of Dial indicator. And our guaranteed run out is not more than 1mm due to our highly-automated quality machinery and manufacturing process.
Axial float (End play) is the important parameter for the roller. And for that we are grooving the shaft on the CNC Turning machine which is highly precise. So, we get the accuracy up to 0.007mm. and which is very negligible.
Water ingredient test
In this test sealing arrangement is tested against the ingress of water. The roller is rotated in a special fixture having water showers impinging water on to the roller housings at a particular pressure. At the end of the test, the bearing assembly is removed to check any ingress of water droplets inside the bearing assembly.
(Painting & Packing)